HDPE Shade material for shade sun sails
HDPE Shade material for shade sun sails
The sunshade sail is a sunshade material woven with high-density polyethylene fibers.
Moreover, the gram weight of the fabric usually used for sunshade sails is above 180g per square meter, which can ensure sufficient shading rate.
The sunshade sail made of 185gsm UV-resistant high-density polyethylene sunshade fabric is reinforced by the edges and has strong stitching at every corner.
- A sunsail is a sun material with high density polyethylene fibers. In addition, the fabric normally used for sunsails has a Gram weight higher than 180 grams per square meter, which ensures adequate shading rates.
- Sunsails made of 185 GSM UV resistant HDPE sun fabric are reinforced by edges and have strong stitching at each corner. Each corner has a D-ring made of stainless steel. This D-ring will not rust, has strong tensile strength and provides enough tensile force to support.
- The sun sail is made of breathable material with sunlight effect, thus allowing air and moisture to pass through for better ventilation and comfort. It allows rainwater to pass through, so it does not accumulate water and is not waterproof. Its fabric is a PE material that provides very good UV resistance and can be adapted to the outdoor environment without aging.
Advantages of sunshade sails
The breathable material that can breathe is made of high-density polyethylene material that is completely used for the first time, which is different from those recycled materials. The fabric has been treated with a UV-stabilizing compound, which can prevent the shade sail from fading, maintain toughness, and have a longer service life. Long-term use, the appearance does not change.
The D-ring made of rust-proof metal is usually made of 304 stainless steel. Stronger, stronger anti-rust ability, and at the joint of the D-ring, thickened double-layer material is used for reinforcement.
A hidden support ribbon is also added to the reinforced edge. The structure of this design greatly enhances the strength of the sunshade sail and can resist most windy weather.
The edge of the sunshade sail is not straight, and the other is slightly curved inward. This design can ensure that when the edges are tightened, the middle of the shade sail will not sag. This can achieve the best appearance and performance. This design not only increases the aesthetics, but also prevents the sunshade sail from sagging after installation, which will cause fallen leaves and debris to accumulate.
If you need any other information, please check our website or follow us on social.